SF 45° Elbows
SF 45° elbows are socket fusion fittings that change the direction of PE pipes by 45°. They’re joined by heat welding and are commonly used in gas, water, and industrial systems.
SF 90° elbows
SF 90° elbows are socket fusion fittings used to turn PE piping systems at a 90° angle. They’re joined using heat fusion and are ideal for gas, water, and industrial applications.
SF End Cap
SF End Caps are socket fusion fittings used to seal the end of a PE pipe. They are heat-fused to the pipe and provide a secure, leak-proof closure for gas, water, or industrial systems.
SF Shipping Cap
A Socket Fusion Shipping Cap is a temporary protective cover placed over the socket end of a pipe or fitting to prevent contamination and damage during shipping or storage.
SF Couplings
SF Couplings are socket fusion fittings used to join two PE pipes in a straight line. They’re joined by heating and fusing the pipe ends into the coupling, creating a strong leak-proof connection.
SF Female Adapter
SF Female Adapters are socket fusion fittings that connect PE pipes to male threaded fittings. One end fuses to the pipe, and the other has a female thread for easy connection to threaded parts.
SF Flange Adapters
SF Flange Adapters are socket fusion fittings that connect PE pipes to flanged components like valves or pumps. One end fuses to the pipe, while the other provides a flange face for connections.
SF Reducing Bushing
A Socket Fusion (SF) Reducing Bushing is a pipe fitting used to connect two socket fusion pipes or fittings of different sizes by reducing the diameter from a larger socket to a smaller one.
SF Reducing Coupling
SF Reducing Tees are socket fusion fittings used to connect three PE pipes of different sizes. They have one branch outlet smaller than the main line, allowing for a reduced side connection.
SF Reducing Tees
SF Reducing Tees are socket fusion fittings used to connect three PE pipes of different sizes. They have one branch outlet smaller than the main line, allowing for a reduced side connection.
SF Service Saddle
A SF Service Saddle is used to create a branch connection on a main HDPE pipe without cutting it. It’s socket-fused onto the pipe, ensuring a durable, leak-proof joint for service lines.
SF Outlet High Volume
A SF Outlet High Volume is a socket fusion fitting that creates a branch connection with increased flow capacity. It’s used in HDPE systems where higher fluid volumes are required.
SF Tees
SF Tees are socket fusion fittings used to connect three PE pipes of the same size, forming a T-shaped branch. They allow for a 90° connection between the main line and a side outlet.
SF UBend
SF U-Bends are socket fusion fittings that allow a 180° change in direction of PE pipes. They’re used where space is limited or a full loop-back is needed in gas, water, or industrial systems.
SF Wyes
SF Wyes are socket fusion fittings used to split a PE pipe line at a 45° angle. They allow smooth flow diversion and are ideal for branching in gas, water, or industrial piping systems.
Contact
Reach out to learn more, request a quote, or connect with our team—we’re here to help.